A Coldharbour company - serving Dallas, TX

York Heat Pump Service Nationwide

Furnace & heatingFurnace & heating
AC repairAC repair
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

Your new heating and cooling system for as low as$119/month*On approved credit; ask for current terms

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

York Heat Pump Service: The Dallas Owner’s Guide

York heat pump service in Dallas typically runs $150 to $650 for most repairs, with common part replacements like capacitors, contactors, and defrost sensors landing in the $180 to $340 range parts and labor included. We stock York-compatible parts on our trucks and can usually have a technician at your door the same day you call. Most Dallas homeowners discover they need York heat pump service when the system stops cooling in August, starts blowing room-temperature air in January, or the outdoor unit begins making a sound that wasn’t there last week. A York heat pump is a solid machine, but a single failed part, a worn capacitor or a stuck reversing valve, brings the whole system to a halt. The good news: the fix is usually faster and cheaper than most people expect, and we write the price down before we open the tool bag.

Call (430) 213-5796

Which York Models This Applies To

We service the full York residential heat pump lineup, including the Affinity series (YXV, YZV), the LX series (YHM, YHE), the TCGF and TCHE single-stage units, and the newer HMH7 and HH8 inverter-driven models. Older York heat pumps from the early 2000s, the Stealth and Stellar lines, are still on our service list and we carry parts for many of them. The fastest way to identify your unit is the data plate on the side or back of the outdoor cabinet: it lists the model number, serial number, and refrigerant type. That plate tells us everything we need to match the right part the first time. One York-specific gotcha: the Affinity and LX series use different control boards even within the same tonnage, so a board pulled from a 3-ton YHE will not run a 3-ton YZV. It’s not interchangeable, and a mismatched board can damage the compressor. That’s why we always verify the model and serial before ordering or installing anything. On OEM versus aftermarket: for York compressors, reversing valves, and defrost boards, we recommend OEM York parts. They’re built to the exact voltage and refrigerant specs of your unit. For capacitors, contactors, and fan motors, quality aftermarket equivalents from names like AmRad and Mars often match or exceed OEM performance at a better price, and we’re happy to show you both options with real numbers.

Explore

Styles & brands we work with

AC repair
AC repair
Furnace & heating
Furnace & heating
Heat pumps
Heat pumps
Ductless mini splits
Ductless mini splits
Carrier
Carrier
Trane
Trane

Signs Your York Heat Pump Needs Service

  • Outdoor unit runs but doesn’t heat or cool. This usually points to a failed compressor capacitor or a reversing valve stuck in one position. The system is moving refrigerant, but it can’t shift between modes or start the compressor properly.
  • The outdoor unit is covered in frost or ice in winter. The defrost control board or defrost sensor has failed, so the unit isn’t cycling into defrost mode. In Dallas, where winter humidity rides high, a York heat pump that can’t defrost will ice up fast and stop heating altogether.
  • The system short-cycles, turning on and off every few minutes. On York units, this is often a failing run capacitor or a low-pressure switch doing its job. Short cycling kills compressors over time, so this one deserves a same-day call.
  • You hear a loud buzzing or clicking from the outdoor unit. The contactor is sticking or the capacitor is swollen and failing. It’s a cheap part, but ignoring it can take out the compressor, and that is not a cheap part.
  • Warm air blowing in cooling mode, or cool air in heating mode. This is the classic reversing valve failure. On York heat pumps, the reversing valve sits in the outdoor unit and shifts refrigerant direction depending on the season. When it fails, the unit gets stuck in the wrong mode.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

York heat pump service in Dallas lands between $150 and $650 for most repairs, and where you fall in that range depends on which part failed. A condenser fan motor runs $220 to $380. A defrost control board runs $200 to $350. A reversing valve, which requires recovering refrigerant and brazing in the new part, runs $450 to $650. Even a simple capacitor swap is so much cheaper when caught early, usually $150 to $220, that waiting is never worth it. Every quote we give is a written price before work starts, covering the part, the labor, and the refrigerant if the system needs a recharge. No add-ons at the door. No surprises. And every repair carries our 365-Day Done Right Promise: if it fails inside a year, we come back and fix it at no charge.

DIY or Call Us?

York heat pump service is not a DIY job, and here’s why: the outdoor unit carries 220 volts, the capacitor holds a charge even when the power is off, and refrigerant lines operate under pressure. A wrong move on a run capacitor can deliver a serious electrical shock. Even our technicians discharge them with a dedicated tool before touching anything. What you can safely do: check your thermostat settings, replace a dirty air filter, and clear leaves or debris from around the outdoor unit. If the breaker trips repeatedly, don’t keep resetting it, that’s the system telling you something is wrong. For anything past that, call us at (430) 213-5796. We’ll diagnose the exact part, hand you the price in writing, and have your York heat pump running again. Tell the customer the number before the work starts. Everything else follows from that.

FAQs

Need HVAC help in Dallas? Licensed & insured · 30-60 min response · free estimates
Call (430) 213-5796
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Cold Harbour Heating and Air Dallas responds fast. No obligation.

By sending this request, you acknowledge our Privacy Policy and consent to being contacted via phone, email, or SMS about your service request, including from the local pros who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch