Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
TraneSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Furnace Replacement Cost in Dallas?
A full furnace replacement in Dallas, TX typically costs between $3,900 and $7,800 for a mid-efficiency unit, with high-efficiency systems running $6,500 to $12,500 or more depending on the home’s size and existing ductwork. Most Dallas homeowners land right around $5,500 to $8,500 for a complete swap of a standard 1,500 – 2,500 sq ft home’s furnace. These figures include the equipment, labor, permits, and disposal of the old unit. Keep in mind that Dallas’s relatively mild winters mean many homes are getting by with older, oversized equipment that costs more to run than it should – which is precisely why a proper sizing assessment matters before you spend a dime.
If you want a firm number for your home, the fastest way is to have a technician look at the existing setup in person. Cold Harbour Heating and Air Dallas gives you a written price before any work starts, so you know exactly what you’re paying before a single tool comes out. Call (430) 213-5796 for a free estimate.
Furnace Replacement Cost Breakdown (2026)
Here’s what a furnace replacement in Dallas actually costs, line by line. These are real ranges we see across the metro area in 2026, from Oak Cliff to Richardson and everywhere between.
| Cost Item | Typical Dallas Range | Notes |
|---|---|---|
| Furnace unit (80% AFUE, single-stage) | $1,800 – $3,200 | Basic mid-efficiency; common in older Dallas homes |
| Furnace unit (96%+ AFUE, two-stage) | $3,500 – $6,000 | High-efficiency; qualifies for potential utility rebates |
| Labor & installation | $1,500 – $3,500 | Includes removal of old unit, gas line connection, venting |
| Permits & inspection | $150 – $400 | City of Dallas mechanical permit required on replacements |
| Ductwork modifications (if needed) | $500 – $2,500 | Not always necessary; common in homes where the old furnace was oversized |
| Disposal of old unit | $75 – $200 | Usually bundled into the total quote |
| Thermostat upgrade (optional) | $100 – $350 | Smart thermostat or basic digital replacement |
So, a straightforward swap in a home with good ductwork and no surprises sits around $4,500 to $6,500 all in. Add a high-efficiency furnace, some duct repair, and a smart thermostat, and you’re pushing $9,000 or more. The single biggest variable we see in Dallas isn’t the equipment – it’s whether the existing furnace was sized correctly in the first place.
What Affects Furnace Replacement Pricing in Dallas
Furnace replacement costs in Dallas vary more than people expect. Here’s what actually moves the number:
- Efficiency rating (AFUE). An 80% AFUE furnace costs less up front but burns about 20 cents of every dollar in gas as exhaust. A 96%+ unit costs more to buy but can cut your winter gas bill by a noticeable margin. Dallas winters may be short, but gas rates in North Texas have climbed over the last few years, so efficiency matters more than it used to.
- Furnace size (BTUs). A 1,200 sq ft home in Lakewood needs a different furnace than a 3,000 sq ft house in Plano. Bigger isn’t better – an oversized furnace short-cycles, wastes gas, and wears out faster. We measure, we don’t guess.
- Existing ductwork condition. Many Dallas homes built in the 1960s through 1980s have ducts that were adequate for the original furnace but are leaky or undersized for a modern high-efficiency unit. Sealing or replacing sections adds cost but pays you back in comfort and lower bills.
- Access to the furnace location. Attic installations in older Dallas ranch-style homes can take longer than garage or closet installs. Labor costs go up when technicians are working in a 140-degree attic in August, even if the furnace itself never sees August use.
- Permit fees and code requirements. The City of Dallas requires a mechanical permit for furnace replacement, and the current code requires a dedicated circuit and proper venting clearances. An honest quote includes these costs up front instead of surprising you later.
- Brand and warranty terms. A Goodman or Rheem furnace costs less than a Carrier or Lennox, but warranty support and parts availability differ. We service all nine major brands – Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard – so we can give you a straight answer on which makes sense for your budget.
Is It Cheaper to Repair or Replace a Furnace in Dallas?
A furnace repair in Dallas ranges from $150 to $700 for most issues, while a replacement runs $3,900 to $7,800 for a typical home. The standard rule we tell Dallas homeowners: if the repair cost is more than half the value of the furnace, or if the unit is past 15 years old and failing repeatedly, replacement usually wins. A heat exchanger failure on an older unit is almost always a replace situation – that repair alone can hit $1,200 to $2,000, and it’s a sign other components are close behind.
Cold Harbour gives you a straight answer either way. We don’t push replacement on a furnace that has five good years left, and we don’t patch up a unit that’s already outlived its useful life just to bill you next season. The written price you get before work starts tells you exactly what you’re looking at, so you can decide with real numbers instead of a pressure tactic.
How to Save on Furnace Replacement in Dallas
Nobody wants to overpay for a furnace. Here’s how to keep the cost reasonable without cutting corners:
- Get a real load calculation. A furnace sized by square footage alone is often oversized. A proper Manual J calculation accounts for Dallas’s actual heating load, your home’s insulation, window count, and orientation. The right-sized furnace costs less to buy and less to run.
- Ask about utility rebates. Atmos Energy and local co-ops periodically offer rebates for high-efficiency furnace installations. These change year to year, so ask during your estimate.
- Don’t buy the cheapest quote. A suspiciously low Dallas furnace quote usually means something’s missing – the permit, the disposal, the ductwork, or the labor warranty. You’ll find out what’s missing after the job starts, when the price goes up.
- Replace in the off-season. Dallas furnace demand spikes in November and December. If you plan ahead and replace in the spring or early fall, you’ll have more scheduling flexibility, which can translate to better pricing and quicker installs.
- Bundle with AC replacement if both are old. If your AC is also approaching 15 years, replacing both at once can save on labor and permit costs compared to doing them separately. A full AC installation in Dallas runs $3,500 to $7,500, but the combined job typically costs less than the two done independently.
The best way to know your actual number is to have someone look at your home and your existing setup. Cold Harbour Heating and Air Dallas does free estimates – call (430) 213-5796 and we’ll give you a written price with no obligation.
Furnace Replacement in Dallas: What the Process Looks Like
Here’s how a furnace replacement works when Cold Harbour handles it. This is the same process we follow whether it’s a bungalow in Oak Cliff or a newer build in Frisco.
- Call and schedule an estimate. A live person picks up the phone 24/7. We schedule a time that works, and you get a firm arrival window – not a four-hour “some time today” range.
- In-home assessment. A background-checked, uniformed technician comes out, looks at the existing furnace, tests the ductwork, and takes measurements. We also ask about your comfort complaints – uneven heating, noisy operation, high gas bills in January.
- Written price, no obligation. Before we leave, you get a written price covering the furnace, labor, permits, disposal, and any ductwork work needed. That number doesn’t change at the door. It’s the Kingswell Way: say the price before the work starts.
- Installation day. We show up in the window we promised, remove the old unit, install the new furnace, connect the gas line and venting, and test everything. We leave the job site cleaner than we found it – no loose screws, no scrap metal, no insulation bits left in the hallway.
- Written guarantee. Your furnace installation is backed by the 365-Day Done Right Promise. If something isn’t done right within a full year, Cold Harbour comes back and makes it right at no charge. This guarantee is written down, not verbal, and it goes home with you before we leave.
The name Cold Harbour comes from a real thing – a cold harbour was a roadside shelter where travelers waited out bad weather. That’s the job: making sure your house holds its warmth when the cold front rolls down from Amarillo, and holds its cool when July settles over Dallas. Comfort in any season, backed in writing.
FAQs – Furnace Replacement Cost in Dallas
How much does a furnace cost for a 2,000 sq ft home in Dallas?
A furnace replacement for a 2,000 sq ft home in Dallas typically runs $4,500 to $7,500 for a mid-efficiency unit and $6,000 to $9,500 for a high-efficiency model, installed. The exact number depends on the existing ductwork and whether any venting changes are needed. Call (430) 213-5796 for an exact quote – estimates are free.
How long does furnace replacement take in Dallas?
Most furnace replacements in Dallas take 4 to 8 hours for a standard swap. If ductwork changes or venting adjustments are required, the job can extend to 1 to 2 days. Cold Harbour gives you a firm arrival window and completes the work in a single visit whenever possible.
Can you replace a furnace the same day in Dallas?
Same-day furnace replacement is available during the summer and early fall when demand is lower, but during a Dallas winter cold snap, scheduling typically runs 2 to 5 days out. If you call (430) 213-5796, a live person picks up 24/7 and can tell you the soonest available window immediately.
What size furnace do I need for a Dallas home?
Dallas’s mild winter climate means many homes need a furnace between 40,000 and 80,000 BTUs, depending on square footage, insulation, and window quality. An oversized furnace costs more to buy and runs less efficiently, so a proper load calculation is worth the time. We do this on every estimate.
Are high-efficiency furnaces worth it in Dallas?
For most Dallas homeowners, a high-efficiency furnace (96% AFUE or higher) adds $1,500 to $3,000 to the replacement cost but cuts winter gas bills by 10 – 20%. Because Dallas winters are shorter than cities further north, the payback period is longer here – typically 7 to 12 years. If you plan to stay in the home long-term or want the utility rebates, it’s a solid investment. If you’re planning to sell within a few years, a mid-efficiency unit may serve you better.
For more details on the full furnace replacement process in the Dallas area, see our guide on Furnace Replacement in Dallas. And if you’d like to start with the basics, visit our home page to see everything Cold Harbour Heating and Air Dallas covers.
Written by Victor Mancini, Owner at Cold Harbour Heating and Air Dallas, serving Dallas since 2003.
Pricing reflects the Dallas market as of 2026. Cold Harbour Heating and Air Dallas offers free estimates – call (430) 213-5796.
What Our Customers Say
"AC died overnight with a newborn in the house. They bumped us up the list and had it running by noon. I about hugged the guy. Fair price even on a rush call."
- Celeste Ngo"New AC and furnace. They gave me a written quote with a couple of options and no pressure. Showed up on the day they promised and the new system is so much quieter."
- Gloria Dunn"Repair was done right and the price was fair. Took a couple days to get on the schedule during the summer rush, which is understandable. Tech was sharp once he got here."
- Marty Whitcomb